Jetex are pleased to be able to offer a catalytic converter that has been designed specifically for the classic car market. A unique converter design allows a dramatic reduction in exhaust smells and harmful emissions without the noticeable loss of performance.One of the downsides of owning a classic car is the heavy and choking exhaust smell, which is hazardous to your health. The Classic Car Converter eliminates this smell, making your driving experience more pleasing. Whether petrol is burned at an optimal air/fuel/oxygen ratio, or too lean or too rich, the combustion of petrol creates emissions that include harmful gases, such as Nitrogen Oxides (NOx), Hydrocarbons (HC), Carbon Dioxide (CO2) and Sulphur Dioxide (SO2).These harmful gases affect humans through the impairment of the immune system and development of respiratory diseases, while environmentally help to create acid rain and accelerate ozone depletion.The Classic Car Converter also significantly reduces Hydrocarbon (HC) and Nitrogen Oxide (NOX) emissions - a range of gases that are well known to be harmful to people and the environment. The Jetex Classic Car Converter has been designed to perform on pre-catalytic converter vehicle models. It is important that the following fitting instructions are read carefully.The converter has been manufactured with a short and long set of cones to improve gas flow and performance. The short spun cone needs to be fitted towards the engine side of the vehicle to allow the exhaust gases to flow freely into and through the catalyst.The converter needs to be fitted within approximately 1m (100cm) of the engine so that the exhaust gases can heat the converter to the minimum operating temperature of 280°C. This temperature allows the converter to convert the exhaust gases. If required, two adaptor tubes are included for easier installation. Jetex also offer other fittings as part of our custom exhaust parts range. The converter and adaptor tubes should be welded to the vehicle's exhaust system to prevent any leaks and allow the converter to function correctly.It is important that the vehicle's engine is tuned correctly. If not, this can cause the converter to perform at a sub optimum level and possibly cause damage to the converter.